Contact us
West side of Jianshe Road, South side of Yongtai Road, Jizhou City, Hengshui City, China
FRP Dust Suppression Wall
Share to
- Description details
-
Product Introduction
The FRP dust suppression wall (also known as FRP windproof dust suppression net) is an eco-friendly dust control facility formed by composite technology, using glass fiber reinforced resin (FRP) as the base material. Through physical barrier and aerodynamic design, it reduces wind erosion and dust, and is widely applied in open-air storage yards, industrial zones, and other scenarios. With advantages of wind resistance, corrosion resistance, flame retardancy, and light weight, it helps enterprises achieve efficient control of dust pollution.
Production Process
1. Material Proportioning
Resin System: Unsaturated polyester resin/vinyl ester resin is selected, matched with glass fiber yarn (content: 40%-60%) and flame-retardant & anti-aging additives.
Conductive Products: Conductive fillers such as graphite/carbon fiber are added to enhance anti-static performance.
2. Molding Processes
Compression Molding: Cured at high temperature in molds, featuring high surface flatness, suitable for standardized plate production.
Pultrusion Molding: Continuously produces profiles with uniform strength, applicable to skeleton structures.
Surface Treatment: Coated with anti-ultraviolet (UV) layers to enhance weather resistance.
Product Features
High-efficiency Dust Suppression:With an opening rate of 30%-50%, it can reduce wind speed by 40%-60% and achieve a dust suppression efficiency of over 85%.
Weather & Corrosion Resistance: Resistant to acid, alkali, and salt corrosion, with a service life of ≥15 years in harsh environments like coastal areas and chemical plants.
Wind & Pressure Resistance: Withstand wind pressure ≥1.2kPa (equivalent to a Category 12 typhoon) and tensile strength ≥180MPa.
Flame-retardant Safety: Oxygen index ≥28%, complying with non-combustible material standards to eliminate dust explosion hazards.
Convenient Installation: Modular design, weighing only 1/3 of metal nets, shortening the construction period by 50%.
Environmental Friendliness & Aesthetics: Customizable in color and pattern, integrating ecological protection and landscape beautification functions.
Product Specifications
Category Common Specifications Optional Range Plate Thickness 2-5mm 1.5-8mm Single Unit Size 1.2m×2m, 1.5m×3m Length ≤6m,
Width ≤2.5mMesh Hole Shape Diamond, Square, Strip Aperture 5-50mm Skeleton Profile Square Tube (50×50mm), Angle Steel (40×40mm) Customizable special profiles Core Parameters
Material: FRP (Glass Fiber + Resin);
Density: 1.8-2.1g/cm³;
Temperature Resistance Range: -40℃~120℃ (High-temperature type up to 150℃);
Conductivity: Conductive products ≥10⁻² S/m;
Aging Resistance: Weather resistance grade ≥10,000 hours (equivalent to 10 years of outdoor use)
Application Scenarios
Mines/Coal Mines: Dust control for open-pit mines and coal stockpiles, reducing dust pollution and resource loss.
Ports/Docks: Wind and dust suppression for bulk cargo yards, resisting sea breeze corrosion and protecting the working environment.
Power Plants/Iron & Steel Plants: Management of fly ash and sintered ore stockpiles to meet ultra-low emission requirements.
Chemical Parks: Treatment of corrosive dust, combining corrosion resistance and safety.
Construction Sites: Coverage for temporary stockpiles to reduce the impact of construction dust on the surrounding environment.
Roads/Railways: Dust control for freight yards along the lines, minimizing dust interference with traffic and residents.
Contact Us
Keywords:
Related Products
CONTACT INFORMATION
West side of Jianshe Road, South side of Yongtai Road, Jizhou City, Hengshui City, China
Tel: +86-15075823759
WhatsApp: +86-15075823759
Email: info@good-frp.com
